$89.99
Professional-grade ceramic coating providing up to 5 years of hydrophobic protection and glossy finish for your vehicle.
The Axlom Ceramic Coating Pro is a state-of-the-art protective coating developed specifically for automotive surfaces. This professional-grade ceramic coating bonds at the molecular level with your vehicle's paint, creating an extremely durable, hydrophobic surface that repels water, dirt, and contaminants.
Formulated with SiO2 (silicon dioxide) and TiO2 (titanium dioxide), this advanced coating provides exceptional gloss, superior scratch resistance, and UV protection to prevent oxidation and fading. A single application can provide up to 5 years of protection with proper maintenance.
| Volume | 50ml |
| Durability | Up to 5 years |
| SiO2 Content | 80% |
| Application Method | Hand application with applicator (included) |
| Curing Time | 24 hours initial, 7 days full cure |
| Water Contact Angle | >110° |
| Heat Resistance | Up to 300°C |
| Coverage | Approximately 2-3 vehicles |
| Shelf Life | 2 years (unopened) |
Thoroughly wash and decontaminate the vehicle. Remove any bonded contaminants with a clay bar. For best results, paint correction should be performed to remove swirls and scratches.
Wipe the surface with Axlom Panel Prep solution to remove any oils or residues. Ensure the surface is completely dry and clean.
Apply 4-5 drops of Ceramic Coating Pro to the application suede cloth. Work in small sections (approximately 2ft x 2ft). Apply in a cross-hatch pattern (left to right, then up and down).
Allow the product to flash for 1-3 minutes depending on ambient temperature and humidity.
Using a clean, high-quality microfiber towel, gently buff the surface to remove excess product. Use a second clean microfiber towel for final buffing.
Allow the coating to cure for a minimum of 24 hours in a covered area, protected from water, dust, and direct sunlight. Full curing takes approximately 7 days.
As a professional detailer, I've tried dozens of ceramic coatings over the years. This is by far the best in terms of ease of application and durability. My client's black BMW still beads water like day one after 14 months. Highly recommended for professionals.
The results are amazing - my red Mazda looks deeper and richer than ever. However, as a DIYer, the application was challenging. I had some high spots that were difficult to remove. Watch plenty of tutorial videos before attempting!
I was hesitant about the price, but decided to give it a try on my Tesla Model 3. The gloss and slickness are incredible. Water literally flies off the car while driving. After 8 months through Canadian winter, it's still performing perfectly. Will definitely buy again.
Item added to cart
